# Feature request: rounded stroke corners **URL:** \ **Category:** Uncategorized\ **Created:** [February 5, 2022, 5:19pm UTC](https://forum.glyphsapp.com/t/feature-request-rounded-stroke-corners/21582 "2022-02-05T17:19:50Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![bastian](https://forum.glyphsapp.com/letter_avatar_proxy/v4/letter/b/779978/32.png) [@bastian](https://forum.glyphsapp.com/u/bastian)\ **Post date:** [February 5, 2022, 5:19pm UTC](https://forum.glyphsapp.com/t/feature-request-rounded-stroke-corners/21582/1 "2022-02-05T17:19:50Z")
Dear Glyphs team! Working with Glyphs’s strokes is working very well and I’m happy this feature has been added. However, I’m very missing one small feature I’m acquainted working with in other vector applications: the possibility to round the corners with the same radius as the terminals. While it is already possible to round the stroke’s terminals, it would be great to have also the possibility to round the corners of a stroke in the same radius. Especially for creating rounded typefaces this would render a big advantage. Currently, the only option for a stroke’s corners is that they are sharp: ![Bildschirmfoto 2022-02-05 um 18.10.37](https://forum.glyphsapp.com/uploads/default/original/3X/0/b/0bbfd071808566debc1a3e63eceecd612a0e0814.png) With the feature I propose, there could be a toggle in the UI as in this mock-up (see the bottom right corner): ![visualisation](https://forum.glyphsapp.com/uploads/default/original/3X/b/7/b78d9f84cee076bdc4f3bce7fc7317e771bf9c7a.png) Switching to the rounded option would round the corner with a radius which is equal to half of the stroke’s width, as it works for the stroke’s terminals (mock-up): ![Bildschirmfoto 2022-02-05 um 18.19.09](https://forum.glyphsapp.com/uploads/default/original/3X/7/9/7990642ba78c9b4718493722ba08d41c84808a00.jpeg) This would come in very handy and I’d appreciate if you could consider my proposal! 😊 Best regards, Basti ---
**Author:** ![AlbertoFM](https://forum.glyphsapp.com/user_avatar/forum.glyphsapp.com/albertofm/32/32690_2.png) [@AlbertoFM](https://forum.glyphsapp.com/u/AlbertoFM)\ **Post date:** [February 19, 2022, 12:21pm UTC](https://forum.glyphsapp.com/t/feature-request-rounded-stroke-corners/21582/2 "2022-02-19T12:21:40Z")
As I need a lot of monoline typefaces for pen plotting and laser engraving I second this! ---
**Author:** ![GeorgSeifert](https://forum.glyphsapp.com/user_avatar/forum.glyphsapp.com/georgseifert/32/259_2.png) [@GeorgSeifert](https://forum.glyphsapp.com/u/GeorgSeifert)\ **Post date:** [February 19, 2022, 1:54pm UTC](https://forum.glyphsapp.com/t/feature-request-rounded-stroke-corners/21582/3 "2022-02-19T13:54:11Z")
Noted ---
**Author:** ![drawcard](https://forum.glyphsapp.com/user_avatar/forum.glyphsapp.com/drawcard/32/14784_2.png) [@drawcard](https://forum.glyphsapp.com/u/drawcard)\ **Post date:** [March 8, 2023, 9:09am UTC](https://forum.glyphsapp.com/t/feature-request-rounded-stroke-corners/21582/5 "2023-03-08T09:09:42Z")
Hi! Has there been any progress on this? I am in the same boat and would like to round the corners of these corners non-destructively. Thanks. ---
**Author:** ![AndreasChlupka](https://forum.glyphsapp.com/user_avatar/forum.glyphsapp.com/andreaschlupka/32/11567_2.png) [@AndreasChlupka](https://forum.glyphsapp.com/u/AndreasChlupka)\ **Post date:** [April 15, 2023, 11:32am UTC](https://forum.glyphsapp.com/t/feature-request-rounded-stroke-corners/21582/6 "2023-04-15T11:32:08Z")
I’ve explored using Glyphs to create a font for a keyboard legend design and truly miss this feature, too. ---
**Author:** ![GeorgSeifert](https://forum.glyphsapp.com/user_avatar/forum.glyphsapp.com/georgseifert/32/259_2.png) [@GeorgSeifert](https://forum.glyphsapp.com/u/GeorgSeifert)\ **Post date:** [April 21, 2023, 3:18pm UTC](https://forum.glyphsapp.com/t/feature-request-rounded-stroke-corners/21582/7 "2023-04-21T15:18:10Z")
I added it but it will be in a future version. ---
**Author:** ![grossgross](https://forum.glyphsapp.com/letter_avatar_proxy/v4/letter/g/258eb7/32.png) [@grossgross](https://forum.glyphsapp.com/u/grossgross)\ **Post date:** [December 4, 2023, 5:53pm UTC](https://forum.glyphsapp.com/t/feature-request-rounded-stroke-corners/21582/8 "2023-12-04T17:53:02Z")
hello, is there any update on this? workaround is to cut the paths, but obviously this isn’t ideal… ---
**Author:** ![GeorgSeifert](https://forum.glyphsapp.com/user_avatar/forum.glyphsapp.com/georgseifert/32/259_2.png) [@GeorgSeifert](https://forum.glyphsapp.com/u/GeorgSeifert)\ **Post date:** [December 5, 2023, 12:40pm UTC](https://forum.glyphsapp.com/t/feature-request-rounded-stroke-corners/21582/9 "2023-12-05T12:40:09Z")
We are work on it. ---
**Author:** ![Onno](https://forum.glyphsapp.com/letter_avatar_proxy/v4/letter/o/dec6dc/32.png) [@Onno](https://forum.glyphsapp.com/u/Onno)\ **Post date:** [January 2, 2024, 5:33pm UTC](https://forum.glyphsapp.com/t/feature-request-rounded-stroke-corners/21582/10 "2024-01-02T17:33:52Z")
Great to hear that! I was just searching for this, Right now I’m using separate strokes to have the same effect, but it feels like the wrong thing to do (and has issues with variable fonts). ![Scherm­afbeelding 2024-01-02 om 18.32.05](https://forum.glyphsapp.com/uploads/default/original/3X/3/5/35523b595b8f7a96c5212a0e16efe2897a954fa0.jpeg) ---
**Author:** ![GeorgSeifert](https://forum.glyphsapp.com/user_avatar/forum.glyphsapp.com/georgseifert/32/259_2.png) [@GeorgSeifert](https://forum.glyphsapp.com/u/GeorgSeifert)\ **Post date:** [January 2, 2024, 6:10pm UTC](https://forum.glyphsapp.com/t/feature-request-rounded-stroke-corners/21582/11 "2024-01-02T18:10:24Z")
This will come in the next bigger release. ---
**Author:** ![BrunoJacoby](https://forum.glyphsapp.com/letter_avatar_proxy/v4/letter/b/3bc359/32.png) [@BrunoJacoby](https://forum.glyphsapp.com/u/BrunoJacoby)\ **Post date:** [June 19, 2024, 8:12am UTC](https://forum.glyphsapp.com/t/feature-request-rounded-stroke-corners/21582/12 "2024-06-19T08:12:42Z")
Just wanted to carefully asked when this is coming? Thanks for the anazing work 😌 ---
**Author:** ![FlorianPircher](https://forum.glyphsapp.com/user_avatar/forum.glyphsapp.com/florianpircher/32/30457_2.png) [@FlorianPircher](https://forum.glyphsapp.com/u/FlorianPircher)\ **Post date:** [June 19, 2024, 1:35pm UTC](https://forum.glyphsapp.com/t/feature-request-rounded-stroke-corners/21582/13 "2024-06-19T13:35:42Z")
No date yet, but we are close now then we were back then. ---
**Author:** ![Yazeed](https://forum.glyphsapp.com/user_avatar/forum.glyphsapp.com/yazeed/32/26522_2.png) [@Yazeed](https://forum.glyphsapp.com/u/Yazeed)\ **Post date:** [June 28, 2024, 5:26pm UTC](https://forum.glyphsapp.com/t/feature-request-rounded-stroke-corners/21582/14 "2024-06-28T17:26:39Z")
![Screenshot 2024-06-28 at 8.23.04 PM](https://forum.glyphsapp.com/uploads/default/original/3X/0/3/036ab1e62a2efe32b21e6d8cf874f55a6a64853f.png) I really was searching for this feature, similar to illustrator having three corner options **(Miter, Round and Bevel )** Thanks in advance and your efforts in development of this fantastic app! ---
**Author:** ![thierryc](https://forum.glyphsapp.com/user_avatar/forum.glyphsapp.com/thierryc/32/28231_2.png) [@thierryc](https://forum.glyphsapp.com/u/thierryc)\ **Post date:** [June 28, 2024, 5:40pm UTC](https://forum.glyphsapp.com/t/feature-request-rounded-stroke-corners/21582/15 "2024-06-28T17:40:15Z")
Do you have a date in mind ? ---
**Author:** ![Onno](https://forum.glyphsapp.com/letter_avatar_proxy/v4/letter/o/dec6dc/32.png) [@Onno](https://forum.glyphsapp.com/u/Onno)\ **Post date:** [July 23, 2024, 10:51am UTC](https://forum.glyphsapp.com/t/feature-request-rounded-stroke-corners/21582/16 "2024-07-23T10:51:17Z")
Great to hear that you’re making progress. The rounded corners filter, sadly, does not do the trick. And has some weird errors with narrow corners. ---
**Author:** ![GeorgSeifert](https://forum.glyphsapp.com/user_avatar/forum.glyphsapp.com/georgseifert/32/259_2.png) [@GeorgSeifert](https://forum.glyphsapp.com/u/GeorgSeifert)\ **Post date:** [July 23, 2024, 1:05pm UTC](https://forum.glyphsapp.com/t/feature-request-rounded-stroke-corners/21582/17 "2024-07-23T13:05:11Z")
Can you send me some examples where the round corner filter doesn’t produce desirable results? ---
**Author:** ![Onno](https://forum.glyphsapp.com/letter_avatar_proxy/v4/letter/o/dec6dc/32.png) [@Onno](https://forum.glyphsapp.com/u/Onno)\ **Post date:** [October 25, 2024, 7:07am UTC](https://forum.glyphsapp.com/t/feature-request-rounded-stroke-corners/21582/18 "2024-10-25T07:07:28Z")
Hi sorry for the lack of response, I never got a notification. Anyways I’m getting some weird rounding errors with my glyphs: ![Scherm­afbeelding 2024-10-25 om 08.57.40](https://forum.glyphsapp.com/uploads/default/original/3X/d/0/d06cffb0e643093448f60fb1611a21ca36d23173.png) Using the rounded corner script isn’t really a non-destructible way of working, right? The rounded corners I want to use are just too steep for the script I guess. ![uDvREo0](https://forum.glyphsapp.com/uploads/default/original/3X/e/1/e1c6d43d331d7826c623983f770c1af9470bf88d.png) Anyways the font I’m working on is open-source, so that might help: > **[GitHub - Arcticons-Team/Arcticons-Font: The font mainly used by Arcticons](https://github.com/Arcticons-Team/Arcticons-Font)** > > The font mainly used by Arcticons (can’t post more than 2 links :') Thanks 🙂 ---
**Author:** ![pictomato](https://forum.glyphsapp.com/user_avatar/forum.glyphsapp.com/pictomato/32/1035_2.png) [@pictomato](https://forum.glyphsapp.com/u/pictomato)\ **Post date:** [December 2, 2024, 12:18pm UTC](https://forum.glyphsapp.com/t/feature-request-rounded-stroke-corners/21582/19 "2024-12-02T12:18:48Z")
Any news on this? ---
**Author:** ![FlorianPircher](https://forum.glyphsapp.com/user_avatar/forum.glyphsapp.com/florianpircher/32/30457_2.png) [@FlorianPircher](https://forum.glyphsapp.com/u/FlorianPircher)\ **Post date:** [December 3, 2024, 6:13pm UTC](https://forum.glyphsapp.com/t/feature-request-rounded-stroke-corners/21582/20 "2024-12-03T18:13:47Z")
Not yet, but we are getting closer. ---
**Author:** ![qassimhaider](https://forum.glyphsapp.com/user_avatar/forum.glyphsapp.com/qassimhaider/32/34595_2.png) [@qassimhaider](https://forum.glyphsapp.com/u/qassimhaider)\ **Post date:** [April 2, 2025, 10:16am UTC](https://forum.glyphsapp.com/t/feature-request-rounded-stroke-corners/21582/21 "2025-04-02T10:16:10Z")
Any updates on the round corners? , it only works with the ends of the open strokes, not with corners yet! And the temporary solution is to use the Round corner filter. [Next page](https://forum.glyphsapp.com/t/feature-request-rounded-stroke-corners/21582.md?page=2)